[. . . ] Close supervision is necessary when the appliance is used by or near children. Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. [. . . ] Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. Do not let cord hang over edge of table or counter, or touch hot surfaces. Do not place on or near a hot gas or electric burner, or in a heated oven. Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. To reduce the risk of fire or electric shock, do not disassemble the machine. In this phase you can: Language & display language English Note: the rinse cycle is performed every time the machine is started up, after the warming phase. This setting automatically adjusts the parameters which allow the user to perform correct machine maintenance. Note: the day of the week is automatically set according to the set date. After 1 hour Interval 2 on 00:00 off 00:00 interval 3 on 00:00 off 00:00 To rinse the brew group, simply clean with water as shown on page 33, on a regular basis. this thorough cleaning cycle (below) completes the maintenance process of the brew group. We recommend carrying out this cycle on a monthly basis, or every 500 coffees, using Saeco cleaning tablets, which can be purchased separately. Never drink the descaling solution or any products dispensed until the cycle has been carried out to the end. When descaling is performed, someone must be present during the entire process (approx. [. . . ] Never drink the descaling solution or any products dispensed until the cycle has been carried out to the end. When descaling is performed, someone must be present during the entire process (approx. Do not wash the brew group with harsh or abrasive detergents or chemicals which could prevent it from operating correctly. [. . . ]